California Well Data › Butte County › Feather Falls (95940)
Feather Falls, CA (95940): well depth, water level & drilling cost
✓ 161 DWR records · Butte County
Pull every recorded well near a Feather Falls (95940) address — $49
How deep are wells in and around Feather Falls (95940), California?
The median drilled well depth in and around Feather Falls (95940) is 240 ft, based on 161 wells with recorded depths in the state DWR database. Half fall between 180 ft and 340 ft; 90% are shallower than 460 ft.
How much does it cost to drill a well in and around Feather Falls (95940)?
Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Feather Falls (95940)?
The median static water level is 68 ft below ground surface (middle half of wells: 53 ft–112 ft), from 14 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Butte County.
Part of Butte County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.