California Well Data › Calaveras County › Wilseyville (95257)
Wilseyville, CA (95257): well depth, water level & drilling cost
✓ 229 DWR records · Calaveras County
Pull every recorded well near a Wilseyville (95257) address — $49
How deep are wells in and around Wilseyville (95257), California?
The median drilled well depth in and around Wilseyville (95257) is 309 ft, based on 147 wells with recorded depths in the state DWR database. Half fall between 180 ft and 420 ft; 90% are shallower than 560 ft.
How much does it cost to drill a well in and around Wilseyville (95257)?
Applying published per-foot rates to the local median depth of 309 ft: drilling and casing alone typically runs $7,725–$20,085; a complete system including pump, pressure tank, and hookup typically runs $18,540–$30,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Wilseyville (95257)?
The median static water level is 70 ft below ground surface (middle half of wells: 40 ft–100 ft), from 65 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Calaveras County.
Part of Calaveras County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.