⟁ California Well Data field records · 2026 survey

California Well Data › Calaveras County › Wallace (95254)

Wallace, CA (95254): well depth, water level & drilling cost

✓ 343 DWR records · Calaveras County

303 ftmedian well depth
240 ft–360 fttypical depth range
110 ftmedian static water level
73 gpmmedian yield (112 tests)

Pull every recorded well near a Wallace (95254) address — $49

How deep are wells in and around Wallace (95254), California?

The median drilled well depth in and around Wallace (95254) is 303 ft, based on 277 wells with recorded depths in the state DWR database. Half fall between 240 ft and 360 ft; 90% are shallower than 433 ft.

How much does it cost to drill a well in and around Wallace (95254)?

Applying published per-foot rates to the local median depth of 303 ft: drilling and casing alone typically runs $7,575–$19,695; a complete system including pump, pressure tank, and hookup typically runs $18,180–$30,300. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Wallace (95254)?

The median static water level is 110 ft below ground surface (middle half of wells: 65 ft–175 ft), from 107 measurements.

Drilled depth distribution

0–50 ft 4 50–100 ft 6 100–150 ft 15 150–200 ft 15 200–300 ft 71 300–400 ft 112 400–600 ft 51 600+ ft 3
Looking at a specific property in Wallace (95254)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Wallace (95254)

Free. Goes to licensed drillers working Calaveras County.

Part of Calaveras County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.