⟁ California Well Data field records · 2026 survey

California Well Data › Alameda County › Newark (94560)

Newark, CA (94560): well depth, water level & drilling cost

✓ 592 DWR records · Alameda County

112 ftmedian well depth
30 ft–295 fttypical depth range
10 ftmedian static water level
25 gpmmedian yield (16 tests)

Pull every recorded well near a Newark (94560) address — $49

How deep are wells in and around Newark (94560), California?

The median drilled well depth in and around Newark (94560) is 112 ft, based on 232 wells with recorded depths in the state DWR database. Half fall between 30 ft and 295 ft; 90% are shallower than 433 ft.

How much does it cost to drill a well in and around Newark (94560)?

Applying published per-foot rates to the local median depth of 112 ft: drilling and casing alone typically runs $2,800–$7,280; a complete system including pump, pressure tank, and hookup typically runs $6,720–$11,200. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in and around Newark (94560)?

The median static water level is 10 ft below ground surface (middle half of wells: 7 ft–18 ft), from 24 measurements.

Drilled depth distribution

0–50 ft 101 50–100 ft 7 100–150 ft 21 150–200 ft 4 200–300 ft 42 300–400 ft 29 400–600 ft 24 600+ ft 4
Looking at a specific property in Newark (94560)?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $49
Get quotes from drillers who work in Newark (94560)

Free. Goes to licensed drillers working Alameda County.

Part of Alameda County well records.

Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.