California Well Data › Santa Barbara County › Santa Maria (93454)
Santa Maria, CA (93454): well depth, water level & drilling cost
✓ 487 DWR records · Santa Barbara County
Pull every recorded well near a Santa Maria (93454) address — $49
How deep are wells in and around Santa Maria (93454), California?
The median drilled well depth in and around Santa Maria (93454) is 330 ft, based on 369 wells with recorded depths in the state DWR database. Half fall between 196 ft and 500 ft; 90% are shallower than 610 ft.
How much does it cost to drill a well in and around Santa Maria (93454)?
Applying published per-foot rates to the local median depth of 330 ft: drilling and casing alone typically runs $8,250–$21,450; a complete system including pump, pressure tank, and hookup typically runs $19,800–$33,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Santa Maria (93454)?
The median static water level is 143 ft below ground surface (middle half of wells: 81 ft–200 ft), from 193 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Santa Barbara County.
Part of Santa Barbara County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.