California Well Data › San Luis Obispo County › San Simeon (93452)
San Simeon, CA (93452): well depth, water level & drilling cost
✓ 88 DWR records · San Luis Obispo County
Pull every recorded well near a San Simeon (93452) address — $49
How deep are wells in and around San Simeon (93452), California?
The median drilled well depth in and around San Simeon (93452) is 160 ft, based on 44 wells with recorded depths in the state DWR database. Half fall between 100 ft and 285 ft; 90% are shallower than 340 ft.
How much does it cost to drill a well in and around San Simeon (93452)?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around San Simeon (93452)?
The median static water level is 40 ft below ground surface (middle half of wells: 16 ft–73 ft), from 43 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Luis Obispo County.
Part of San Luis Obispo County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.