California Well Data › San Luis Obispo County › Arroyo Grande (93420)
Arroyo Grande, CA (93420): well depth, water level & drilling cost
✓ 478 DWR records · San Luis Obispo County
Pull every recorded well near a Arroyo Grande (93420) address — $49
How deep are wells in and around Arroyo Grande (93420), California?
The median drilled well depth in and around Arroyo Grande (93420) is 130 ft, based on 194 wells with recorded depths in the state DWR database. Half fall between 90 ft and 240 ft; 90% are shallower than 394 ft.
How much does it cost to drill a well in and around Arroyo Grande (93420)?
Applying published per-foot rates to the local median depth of 130 ft: drilling and casing alone typically runs $3,250–$8,450; a complete system including pump, pressure tank, and hookup typically runs $7,800–$13,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Arroyo Grande (93420)?
The median static water level is 25 ft below ground surface (middle half of wells: 18 ft–45 ft), from 160 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Luis Obispo County.
Part of San Luis Obispo County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.