California Well Data › Riverside County › Lake Elsinore (92530)
Lake Elsinore, CA (92530): well depth, water level & drilling cost
✓ 404 DWR records · Riverside County
Pull every recorded well near a Lake Elsinore (92530) address — $49
How deep are wells in and around Lake Elsinore (92530), California?
The median drilled well depth in and around Lake Elsinore (92530) is 240 ft, based on 295 wells with recorded depths in the state DWR database. Half fall between 156 ft and 395 ft; 90% are shallower than 658 ft.
How much does it cost to drill a well in and around Lake Elsinore (92530)?
Applying published per-foot rates to the local median depth of 240 ft: drilling and casing alone typically runs $6,000–$15,600; a complete system including pump, pressure tank, and hookup typically runs $14,400–$24,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Lake Elsinore (92530)?
The median static water level is 68 ft below ground surface (middle half of wells: 47 ft–100 ft), from 57 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working Riverside County.
Part of Riverside County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.