California Well Data › San Diego County › Palomar Mountain (92060)
Palomar Mountain, CA (92060): well depth, water level & drilling cost
✓ 304 DWR records · San Diego County
Pull every recorded well near a Palomar Mountain (92060) address — $49
How deep are wells in and around Palomar Mountain (92060), California?
The median drilled well depth in and around Palomar Mountain (92060) is 348 ft, based on 250 wells with recorded depths in the state DWR database. Half fall between 225 ft and 500 ft; 90% are shallower than 763 ft.
How much does it cost to drill a well in and around Palomar Mountain (92060)?
Applying published per-foot rates to the local median depth of 348 ft: drilling and casing alone typically runs $8,700–$22,620; a complete system including pump, pressure tank, and hookup typically runs $20,880–$34,800. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in and around Palomar Mountain (92060)?
The median static water level is 85 ft below ground surface (middle half of wells: 42 ft–194 ft), from 59 measurements.
Drilled depth distribution
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $49Free. Goes to licensed drillers working San Diego County.
Part of San Diego County well records.
Method: medians computed from DWR records (filed well completion reports, water-supply uses only (destruction, repair and monitoring wells excluded); depths 0–5,000 ft), grouped by ZIP from the recorded address. Cost estimate applies published per-foot ranges to the local median depth — full methodology & sources.